eSUN PVA Water Soluble Filament

eSUN Water Soluble PVA 3D Printer Filament 0.5kg - 1.75mm

$44.90
This product ships fast from SE-QLD


  • DESCRIPTION
  • eSUN Water Soluble PVA:
    eSUN PVA sticks to other filament while printing and then dissolves away completely in water in just a few hours. It really is that simple. Print complex shapes that were not possible before, with much greater accuracy and bottom surface finish with automatic post processing. Unlock the full potential of your dual extrusion printer with water soluble PVA!

    This video shows eSUN's PVA in action... Awesome!

    eSUN:
    Quality matters. eSUN Industrial is an international leader in FDM inovative technologies and their filament is a testament to their dedication to quality.


    Diameter Consistency:
    It's important that your filament has a very constant diameter if you want to get a great looking print. Variance in filament diameter will result in poor surface quality (primarily on vertical sections), because it produces unwarranted and uncontrollable fluctuations in extrusion rates.

    eSUN promises that their filament has a tolerance of ±0.05mm across all of their rolls that they produce, but in reality, the quality of eSUN's filament far exceeds their listed specifications.

    One independent reviewer found that the "vast majority" of the eSUN filament they tested in fact had a tolerance of ±0.015mm! Additionally, premium looking prints made with eSUN filaments (like what's found in our gallery) authenticate the claims of many that eSUN produces very consistent filament.

    You can be confident that your prints will have fantastic surface uniformity and smoothness with eSUN.

  • SPECIFICATIONS
    • Colour: Natural
    • 1.75mm ±0.05mm (or better)
    • Printing temperature: 190-220°C
    • Low Shrinkage (no warping)
    • Stable diameter (smooth prints)
    • Non Harmful, non-toxic and environmentally friendly
    • *Suitable for Makerbot, Up, RepRap, Cubify and any other FDM 3D printer!
    *Some printers, like the UP Mini, may require modification in order to print at the required temperature.

  • PRINT SETTINGS
    • Hotend: 210°C
    • First Layer: 220°C
    • Heated bed: 0-60°C (we use 40° and UHU glue for adhesion)
    • Cooling fan: on after first layers
    • Min layer time: 8 seconds
    **These slicer settings are simply our recommended starting point—every printer is different so you may have to fine tune your setup.

  • ABOUT US
  • Hey, you made it to the bottom! If you're looking to buy eSUN Water Soluble PVA 3D Printer Filament 0.5kg - 1.75mm in Australia why not check out our reviews down below or on the side of your browser window and see why 1000's of Australians trust us.


    Share this Product


  • REVIEWS

  • Sale

    Unavailable

    Sold Out