eSUN Wood Filament

eSUN Wood 3D Printer Filament 0.5kg - 1.75mm

$29.90
This product ships fast from SE-QLD


  • DESCRIPTION
  • eSUN Wood:
    The refined colour and tone of eSUN's exotic wood filament will remind your senses of the invigorating smells and smooth textures of a full-bodied caramel latte—until you stain it to reveal a master-crafted art piece of rich mahogany. This filament is an experimental product ready to be explored by the adventurous and curious 3D maker. What will you build with eSUN wood?
    Wood-fil contains real Medium Density Fibers (MDF) and thus cannot be printed with the smallest of nozzle diametres (0.5mm or bigger recommended). It can be more difficult to print, but the produced parts are tougher than other wood filaments on the market and have something a little bit special about their final presentation.
    There is also the ability to stain using real wood stain. Here you can find a rave review and details on staining eSUN Wood Filament - But please don't forget to come back

    eSUN:
    Quality matters, but you don't have to pay through the nose for a string of plastic!
    eSUN Industrial is an international leader in FDM inovative technologies and their filament is a testament to their dedication to quality and cost-effectiveness.


    Diameter Consistency:
    It's important that your filament has a very constant diameter if you want to get a great looking print. Variance in filament diameter will result in poor surface quality (primarily on vertical sections), because it produces unwarranted and uncontrollable fluctuations in extrusion rates.

    eSUN promises that their filament has a tolerance of ±0.05mm across all of their rolls that they produce, but in reality, the quality of eSUN's filament far exceeds their listed specifications.

    One independent reviewer found that the "vast majority" of the eSUN filament they tested in fact had a tolerance of ±0.015mm! Additionally, premium looking prints made with eSUN filaments (like what's found in our gallery) authenticate the claims of many that eSUN produces very consistent filament.

    You can be confident that your prints will have fantastic surface uniformity and smoothness with eSUN.

    SPECIFICATIONS
    • 1.75mm ±0.05mm (or better)
    • Printing temperature: 190-200°C
    • Low Shrinkage (no warping)
    • Contains Real MDF (0.5mm+ nozzle recommended)
    • Non Harmful, non-toxic and environmentally friendly
    • *Suitable for Makerbot, Up, RepRap, Cubify and any other FDM 3D printer!
    *Some printers, like the UP Mini, may require modification in order to print at the required temperature.

  • PRINT SETTINGS
    • Hotend: 200°C
    • Nozzle: >0.5mm
    • First Layer: 210°C
    • Heated bed: 0-60°C (we use 40° and UHU glue for adhesion)
    • Cooling fan: on after first layers
    • Min layer time: 8 seconds
    **These slicer settings are simply our recommended starting point—every printer is different so you may have to fine tune your setup.

  • ABOUT US
  • Hey, you made it to the bottom! If you're looking to buy eSUN Wood 3D Printer Filament 0.5kg - 1.75mm in Australia why not check out our reviews down below or on the side of your browser window and see why 1000's of Australians trust us.


    Share this Product


  • REVIEWS
  • Customer Reviews

    Based on 1 review Write a Review

    Sale

    Unavailable

    Sold Out