esun abs+ 1.75 australia

eSUN ABS+ Pro 3D Printer Filament 1kg - 1.75mm

$23.90


  • DESCRIPTION
  • eSUN Optimised ABS+:
    In the race to improve 3D Printing, the materials frontier is perhaps the most exciting and most significant field. eSUN is leading the way with innovative new materials that enhance the capabilities of our beloved 3d printers.

    Kingdom 3D Printing is thrilled to bring eSUN's optimised filament range to Australia. Pro ABS+ is three times stronger and warps significantly less than the cherished original eSUN ABS. Here at Kingdom 3D Printing we have been testing eSUN's ABS+ and have found it prints spectacularly. In our tests we found ABS+ always warped a lot less than regular ABS. We actually had to go out of our way to make our test object warp.

    The only trade off with optimised Pro ABS+ is that it no longer reacts strongly to acetone. If this is a deal breaker for you, please happily return to eSUN Original ABS.

    Why Pro ABS+?
    • Improved Printing Properties
    • STRONG!
    • Significantly Less Warping
    • Beautiful Colour Range
    *Full list of specifications towards the bottom of page
    We stringently tested the warping of eSUN original ABS against the optimised Pro ABS+. We controlled nozzle temp, bed temp, chamber temp, breeze and bed adhesion as strictly as possible. After many print tests we found that ABS+ warps significantly less than ABS every time.  Here's a plot of some of our results. 

    Test 1
    • Bed temp: 100°C
    • Chamber temp: 42°C
    • Chamber door: closed
    • Artificial breeze: No

    Test 2
    • Bed temp: 100°C
    • Chamber temp: 24.5°C
    • Chamber door: open
    • Artificial breeze: Yes

    Test 3
    • Bed temp: 40°C
    • Chamber temp: 26.5°C
    • Chamber door: closed
    • Artificial breeze: No


  • SPECIFICATIONS
    • 1.75mm ±0.05mm (or better)
    • Printing temperature: 220-250°C
    • Low shrinkage (less warping)
    • Stronger than regular ABS
    • Stable diameter (smooth prints)
    • High heat resistance
    • No acetone smoothing
    • Low friction (better for sliding mechanical parts)
    • High heat resistance
    • Can be Dyed
    • *Suitable for Makerbot, Up, RepRap, Cubify and any other FDM 3D printer!
    *Some printers, like the UP Mini, may require modification in order to print at the required temperature.

  • PRINT SETTINGS
    • Hotend: 240°C
    • First Layer: 250°C
    • Heated bed: 90-110°C (we use Blue UHU glue for adhesion)
    • Cooling fan: off (especially on large parts)
    • Min layer time: 5 seconds
    **These slicer settings are simply our recommended starting point—every printer is different so you may have to fine tune your setup.

    Share this Product


  • REVIEWS
  • Customer Reviews

    Based on 21 reviews Be the first to Write a Review

    Sale

    Unavailable

    Sold Out