Skip to content

eSUN Original ABS Black 3D Printer Filament 1.75mm - 1kg

by eSUN
Original price $24.90 - Original price $24.90
Original price
$24.90
$24.90 - $24.90
Current price $24.90
eSUN:
Quality matters. eSUN Industrial is an international leader in FDM inovative technologies and their filament is a testament to their dedication to quality and cost-effectiveness.


Diameter Consistency:
It's important that your filament has a very constant diameter if you want to get a great looking print. Variance in filament diameter will result in poor surface quality (primarily on vertical sections), because it produces unwarranted and uncontrollable fluctuations in extrusion rates.

eSUN promises that their filament has a tolerance of ±0.05mm across all of their rolls that they produce, but in reality, the quality of eSUN's filament far exceeds their listed specifications.

One independent reviewer found that the "vast majority" of the eSUN filament they tested in fact had a tolerance of ±0.015mm! Additionally, premium looking prints made with eSUN filaments (like what's found in our gallery) authenticate the claims of many that eSUN produces very consistent filament.

You can be confident that your prints will have fantastic surface uniformity and smoothness with eSUN.

eSUN ABS:
ABS has a lower 'hardness' and better bonding strength than PLA, so it is more shock resistant and produces objects that are generally more suitable for practical use. It can also resist higher temperatures and has less friction (mechanical parts slide easier). Most ABS colours have a less shiny finish than PLA and are opaque.

Colours:
A major part of what sparked the popularity in eSUN is the rich and vibrant colours of their filaments. One reviewer comments about eSUN's colours, "looks nice and crisp and bright". The product and gallery photo's do show the colours looking great, but you won't have your taste buds stimulated until you hold a beautifully printed part in your hands.

Not only are eSUN's colours refined individually, but they also have one of the largest ranges available on the market.

Price:
eSUN is renowned for it's 'bang for your buck.' You will be hard pressed to find a better filament for less than double the $/kg of eSUN.

  • SPECIFICATIONS
    • 1.75mm ±0.05mm (or better)
    • Stable diameter (smooth prints)
    • Printing temperature: 220-250°C
    • Requires heated bed
    • High temperature resistance
    • Low friction (better for sliding mechanical parts)
    • Slightly flexible
    • *Suitable for Makerbot, Up, RepRap, Cubify and any other FDM 3D printer!
    *Some printers, like the UP Mini, may require modification in order to print at the required temperature.

  • PRINT SETTINGS
    • Hotend: 220-250°C
    • First Layer: 250°C
    • Heated bed: 90-110°C (we use UHU glue for adhesion)
    • Cooling fan: off (especially large parts)
    • Min layer time: 5 seconds
    **These slicer settings are simply our recommended starting point—every printer is different so you may have to fine tune your setup.