esun 3d printer filament PLA plus

eSUN PLA+ Pro 3D Printer Filament 1kg - 2.85mm

This product ships fast from Toowoomba, QLD

  • 2.85mm?
    A message to all our 3mm eSUN filament customers that might be asking where their beloved 3mm filament has gone. The reason for the change is because while a lot of machines do take 3mm filament, some machines require the slightly smaller 2.85mm filament. Since 3mm machines work just fine with 2.85mm, manufacturers are generally starting to opt for the more versatile 2.85mm filament.

    What changes will I need to make from 3mm?
    On your machine, the move from 3mm to 2.85mm only takes 15 seconds. All that is needed is one quick slicer setting change. Simply adjust your filament diameter from 3mm to 2.85mm and you will be up and printing immediately. If your slicer does not have the option to change this setting for some reason, simply adjust your extrusion multiplier by a factor of 0.95.

    Happy printing!

    eSUN Optimised PLA+:
    We are so excited to bring eSUN's optimised filament range to Australia. Pro PLA+ from eSUN prints better than original eSUN PLA on the same settings, is up to 10 times stronger, has much higher inter layer bonding strength and is 100% FDA approved Food Safe. Here at Kingdom 3D Printing we have been testing eSUN's Pro PLA+ and have found it to be superior in every way to a product that was already great. We suspect eSUN will eventually cease producing regular PLA as we have found no reason to prefer it over Pro PLA+.

    • Improved Printing Properties
    • STRONG!
    • FDA Approved Food Safe
    • Beautiful Colour Range
    *Full list of specifications towards the bottom of page

    In the race to improve 3D Printing, the materials frontier is perhaps the most most exciting and most significant field. eSUN is leading the way with innovative new materials that enhance the capabilities of our beloved 3d printers.

    An independent test and review of eSUN Pro PLA+

    • 2.85mm ±0.05mm (or better)
    • Printing temperature: 190-210°C
    • Low Shrinkage (no warping)
    • Much Stronger than Regular PLA
    • Stable diameter (smooth prints)
    • FDA approved food safe
    • Non Harmful, non-toxic and environmentally friendly
    • *Suitable for Makerbot, Up, RepRap, Cubify and any other FDM 3D printer!
    *Some printers, like the UP Mini, may require modification in order to print at the required temperature.

    • Hotend: 195°C
    • First Layer: 200°C
    • Heated bed: 0-60°C (we use 40° and UHU glue for adhesion)
    • Cooling fan: on after first layers
    • Min layer time: 8 seconds
    **These slicer settings are simply our recommended starting point—every printer is different so you may have to fine tune your setup.

    Share this Product

  • Customer Reviews

    Based on 5 reviews Write a Review



    Sold Out